When a problem is found, it can be reported. Creating a report will ensure our development team receives all the needed information to replicate a issue and to correct it if needed. The report issue button is located on the lower right side of all profiles: After pressing the report issue button, the following window …
Author archives: fastseal
Tool management – Cutting limits
A correct definition on the cutting limits will ensure that the tool is correctly selected by the software and that the physical limits of the tools are respected avoiding errors or crashed on the g code. Each group of tools has a different set of settings. Explore the groups below for examples and detailed information …
Multiple parts with chamfers (BUS07)
Version 5.4.2.1 introduces the possibility of machining several parts after a single outside and inside machining. This feature was available in BUS03 profile, but now BUS07 introduces the same concept with the ability of machining also chamfers. Chamfers can be defined in size and length. As example of the part on the image on the …
GR03R 60x80x30 – FANUC 0i-TF
In this post all steps are shown until reaching the GCode for a Utec PLM250E – a 8 tool slot machine, where the software output is very similar to the original equipment manufacturer. A simple GR 50x60x10 profile was selected. Nominals Variables Diameter view Cross section view Material selection PTFE Bronze 55×75 was selected GCode …
FPES16 60x70x9 – Sinumerik 810
In this post all steps are shown until reaching the GCode for the a sinumerik 810 control with linear tools A FPES16 60x70x9 was selected. Nominals Variables Diameter view Cross section view Material selection PTFE Bronze 55×75 was selected GCode The code can be totally seen below that corresponds to the settings chosen. The M-codes, …
Tool management – Definitions
Each cutting tip can have different settings that defines how the tool is used by the software. The user can add, edit, clone and delete tools to suit their exact tool system. Basic settings The basic settings of each tool are defined as follows: Description A small text to help to identify the tool. It …
Kits – Add and edit kit items
To add or edit a kit, the following window was created: On the top section the kit definition settings are present. The only needed information is the kit reference that should be the kit identification. The description is recommended to be filled because it can help other users to identify the kit. The machine brand …
Kits – Add and edit a kit
To add or edit a kit, the following window was created: On the top section the kit definition settings are present. The only needed information is the kit reference that should be the kit identification. The description is recommended to be filled because it can help other users to identify the kit. The machine brand …
Reports – Compounds use quantity
This type of report is intended to list the use of compounds The implemented filters are: The last two columns of the result (use mm) and use (tubes) provides the information of the total length of material used both in mm and in the number of tubes that match the query made with the selected …
Reports – Compounds stock level
This type of report is intended to list the stock level of compounds The implemented filters are: