To tune the quality and speed of the presented seal representation, the performance settings can be changed. If the user hardware is low performant and the seal representation hangs or its movement is very slow, probably is a good ideia to start with antialiasing disabled and gradually increasing the antialiasing samples quantity until a reasonable …
Author archives: fastseal
Visual settings – seal geometry
On the seal geometry settings, the aspect of the seal window can be changed and tunned to suit the user preferences, that mostly depend on the screen size and resolution. The dimensions settings group affects the dimensions (indications of length, sizes) during the display of the seal. The 3D view rotation mode, affects how the …
Visual settings – company
Company information should be set on this page. This information will then be used on reports and prints. There are two logos, with different dimensions, that are used on several occasions by the software. The larger logo should be 500×500 pixies and the smaller one 300×300. To load the logo from your hard disk, press …
Settings – Language
The language of the application can be changed on the settings menu, then selecting the language from the right column. The available languages are presented to the user. Others languages can be added on request. After selecting the desired language, press the accept button located on the bottom of the page. Language will be applied …
Edit work item
Work items, after created can be edited. This is done though the following window: Each option is explained in detail below: Profile details Information about the profile used are shown. The options that can be changed are: Quantity: When the window is present to the user, the original quantity produced is present on the dialog. …
Add edit material
To add or edit materials, the following window is used: Each option is explained in detail below: Designation group Brand: Brand of the product to be added. It must be one of the brands already on the system Product: Selection of the product to be added. It must be one of the products already added …
MySQL service check
MySQL service is needed in order to the software to access most of its data. Therefore is mandatory to be running, or in the local machine or in your server. When the service is not running (or not properly configurated), on the log in window, the information that no connection to the database exists is …
Machine settings – Bar feeder
The bar feeder, also known as a bar loader is a separated accessory, placed behind the lathe chuck, for serial production with the objective of supplying a near continuous operation to the lathe. This is done by opening the chuck and push the raw material then closing the chuck again. The options be below allow …
Machine settings – Machining
The machining settings are general settings related with the gcode output or methods of machining and their options/variations. m.1) Spindle This option forces that the spindle starts after the first cycle movement. Example below: m.2) Tool selection Tool selection menu depends on the cycle type so that individual options are better structured Facing cycles a) …
Machine settings – Performance
The performance settings relate your machine capability with the price calculator. The faster the machine is, less time the seal production will take. Basic settings The first two basic settings should be taken from your machine manual. The first, named combined maximum axis speed, should be set in the units meters/minute and should reflect the …