The machine identification settings were introduced on version 5.4.5.0 (May 2024). They explicitly defines each configuration to be used and organized by machine brand-> machine model -> controller brand -> controller model. The settings are described below: Name Description Machine brand The machine brand Machine model The machine model Controller brand The controller brand Controller …
Category archives: Settings
Live tooling – reserved words
The machine settings, live tooling code is more complex than most of the others as they involve several reserved words, some relevant for the atual live tooling operation type. On this page a description is provided to each of the existing live tooling reserved word. This list might be updated as the live tooling code …
Web FastQuote – import products
If you have hundreds, thousands or more products, inputting all the data by hand via the Admin UI can be too inefficient. To solve this, the web fastquote have a import feature that receives a CSV file with a specific format. In this post information about the expected format is provided. Expected fields To correctly …
Web FastQuote – Syncronize with FastSealCreator
Before machined seals can be properly quoted, the online store must receive information from the software. This information is sent and stored online. Only if changes are made on the software that affects the pricing, this information is needed to be resent. The following instructions are synchronize the pricing settings from the FastSealCreator into the …
Continue reading “Web FastQuote – Syncronize with FastSealCreator”
Web FastQuote – What is it?
What is a Web FastQuote store? In resume, the store created by the FastSealCreator software, described here, will allow any company that uses the FastSealCreator software to: This enables one of the two possibilities for a FastSealCreator user: How does it works for the FastSealCreator user? For the FastSealCreator user, that will be the owner …
Web FastQuote – store creation
When pressing the WebFastQuote on the left menu, the following screen will be presented when the user store does not exist. It is highly recommend that “what is a Web FastQuote store” documentation is read before proceeding. This instructions are to be followed to create a new online store When a store was not yet …
Tool management – Material parameters
A correct definition on the material parameters will ensure that the tool is correctly used during machining. Each group settings can be different from the example on this web page as there are settings that are only available for a determined tool group. For example, a drill does not need different settings for finish or …
Tool management – Cutting limits
A correct definition on the cutting limits will ensure that the tool is correctly selected by the software and that the physical limits of the tools are respected avoiding errors or crashed on the g code. Each group of tools has a different set of settings. Explore the groups below for examples and detailed information …
Tool management – Definitions
Each cutting tip can have different settings that defines how the tool is used by the software. The user can add, edit, clone and delete tools to suit their exact tool system. Basic settings The basic settings of each tool are defined as follows: Description A small text to help to identify the tool. It …
Visual settings – user interface
Settings that change the user interface experience are located on this page. Ask for confirmation before closing the application: Version 5.4.0.8 and up enables this option. If enable it avoids acidental close of the application when the user press the close button on the main top bar. If enable a confirmation window will be shown: