In this post all steps are shown until reaching the GCode for the popular control Fanuc 0i-TF PLUS.
A VPA01A-3-80x100x22 (central PU element of a Vpack) was selected.
Nominals
Variables
Diameter view
Cross section view
Material selection
GCode
The code can be totally seen below that corresponds to the settings chosen.
The M-codes, header and many other features can be set up on the machine configuration. This means that the code can be adapted to the machine. Comments where added manually to the code below so that it is easier to read.
%
O0351 (VPA01A-3_80.000/100.000/22.000/3.000)
(PROFILE: VPA01A-3)
(MEASURES: 80.000/100.000/22.000/3.000)
(MATERIAL: HPU RED 74.000/110.000 - TUBE 72.000/111.000)
(STANDARD: YES)
(DATE OF FILE: 28/09/2022 @ 16:29:24)
(FAST SEAL CREATOR VERSION: 5.2.9.3 BUILD 20220921)
(NUMBER OF PARTS:1)
(FASTSEALCREATOR - MASTOR, LDA)
(FANUC SYSTEM CODE A OI-TF PLUS )
(LICENSED TO MASTOR LDA - PORTUGAL )
G21
G54
( *********************** )
( FACING DOWNWARD )
( *********************** )
G28 U0. W0.
M01
T0505
G92 S2700
G96 M04 S400
M21
G00 X115.000 Z2.000 M07
G01 X115.000 Z0.690 F1.000
( FINISH )
G01 X115.000 Z0.000 F0.130
S380
G01 X68.000 Z0.000 F0.120
G00 X68.000 Z0.690 M09
( *********************** )
( INSIDE )
( *********************** )
G28 U0. W0.
M01
T0113
G92 S2700
G96 M04 S400
M21
G00 X72.000 Z2.500 M07
G01 X72.000 Z1.427 F1.000
G01 X72.000 Z1.027 F0.140
G01 X72.000 Z-2.342
G01 X72.507 Z-3.651
G00 X70.800 Z-3.451
G00 X70.800 Z1.027
( FINISH )
G00 X78.748 Z1.027
G01 X80.487 Z-3.651 F0.120
G00 X71.000 Z-3.451
G00 X71.000 Z5.000 M09
( *********************** )
( OUTSIDE )
( *********************** )
G28 U0. W0.
M01
T0101
G92 S2700
G96 M04 S400
M21
G00 X109.252 Z2.500 M07
G01 X109.252 Z1.427 F1.000
G01 X109.252 Z1.027 F0.140
G01 X107.493 Z-3.651
G00 X109.652 Z-3.451
G00 X109.652 Z1.027
( FINISH )
G00 X101.252 Z1.027
G01 X99.513 Z-3.651 F0.120
G00 X110.252 Z-3.451
G00 X110.252 Z5.000 M09
/( *********************** )
/( INSIDE CHEVRON PLUNGE )
/( *********************** )
/G28 U0. W0.
/M01
/T0723
/G92 S2700
/G96 M04 S400
/M21
/G00 X79.892 Z2.000 M07
/G00 X79.892 Z1.000
/G01 X90.800 Z-4.454 F0.140
/G04 X0.2
/G01 X79.892 Z1.000 F0.500
/G00 X79.892 Z2.000 M09
/( *********************** )
/( OUTSIDE CHEVRON PLUNGE )
/( *********************** )
/G28 U0. W0.
/M01
/T0722
/G92 S2700
/G96 M04 S400
/M21
/G00 X100.108 Z2.000 M07
/G00 X100.108 Z1.000
/G01 X89.200 Z-4.454 F0.140
/G04 X0.2
/G01 X100.108 Z1.000 F0.500
/G00 X100.108 Z2.000 M09
( *********************** )
( FRONT GROOVE )
( *********************** )
G28 U0. W0.
M01
T0505
G92 S2700
G96 M04 S400
M21
G00 X90.000 Z2.000 M07
G00 X90.000 Z-1.054
G01 X90.000 Z-4.854 F0.120
G00 X90.000 Z2.000 M09
( *********************** )
( INSIDE CHEVRON PLUNGE )
( *********************** )
G28 U0. W0.
M01
T0723
G92 S2700
G96 M04 S400
M21
G00 X78.500 Z2.000 M07
G00 X78.500 Z-2.251
G01 X90.800 Z-8.401 F0.140
G04 X0.2
G01 X78.500 Z-2.251 F0.500
G00 X78.500 Z2.000 M09
( *********************** )
( OUTSIDE CHEVRON PLUNGE )
( *********************** )
G28 U0. W0.
M01
T0722
G92 S2700
G96 M04 S400
M21
G00 X101.500 Z2.000 M07
G00 X101.500 Z-2.251
G01 X89.200 Z-8.401 F0.140
G04 X0.2
G01 X101.500 Z-2.251 F0.500
G00 X101.500 Z2.000 M09
(********************)
( ZERO POINT )
(********************)
G10 P0 W3.947
G28 U0. W0.
M00
M99
(MAIN PROGRAM TO REPEAT CODE)
O0001 (VPA01A-380.000/100.000/22.000/3.000)
M0
(TURN OFF OPTIONAL BLOCK SKIP FOR 1ST ELEMENT AND ON FOR REMAINING ELEMENTS)
(MATERIAL: HPU RED 74.000/110.000 - TUBE 72.000/111.000)
(NUMBER OF PARTS: 1)
M98 P10351
G28 U0. W0.
T0303
M30
%